. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM METHOD OF OPERATING AUTO-GREASING SYSTEM is this 2. Auto-greasing switch (1) PRECAUTIONS WHEN HANDLING AUTO-GREASING SYSTEM Loosen lock nut (2) and turn adjustment screw (3) counterclockwise. 3. Method of bleeding air from main line 6 - 4 1. When the starting s witch of the machine system automatically rned ON If auto-greasing switc h (1) is pressed, the g reas e pump c an be operated, regardless of the timer. The grease p ump operates only while the auto -greasing switch is pressed . The grease pump stops auto-greasing switch is released. This switch is used m ainly to check the operatio n of the g rease pump or to supply ad 1.
Lower the bucket ho rizontally to the groun 2. Adjustment of discha Set the all injectors t o the maximum discharge. Loosen the plug insta lled to each injector to bleed air from the main piping. This wor k shall be carry out by two persons . Start bleeding at the inject or nearest the greas e pump, then bleed at the other injectors in order (Rear frame -> Front frame -> Boom -> Bell crank). Front frame