. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM Discharge (cc/cycle) Turn clockwise to stopper (Min. discharge) 0.82 Turn counterclockwise by 10 turns from above position (Max. discharge) 8.2 One turn between the maximum and minimum positions change the discharge by 0.82 cc. After adjusting the discharge, be sure to tighten the lock nut. 6 - 12 2.
I njector (SL1 1) tor is operated by the pressure from the pum 1) The injec and it fee 2) To see if of indicat pin is retr lost, the 3) Adjust th screw (6 1] To re adjus stops 2] If the the f abov 1) The injec and it fee ds grease of the specifie d quantity to the bearin 2) To see if the injector works norm ally, check the operati of indicat or pin (4) on its head. If t he injector is normal, t pin is retr acted first. If the pump s tops and the pressure lost, the pin returns and it is reset for the next greasing 3) Adjust th e discharge from the i ) on its head. njector with adjustme screw (6 1] To re duce the discharge, loo sen lock nut (5) and tu tment screw clockwise.
If the adjustment scre (at the stopper), the dis charge is minimized. 2] If the adjustment screw is re turned by 10 turns fro ully tightened position (m inimum discharge) in mized (8.2 cc/st). e, the discharge is maxi adjusting the discharge f rom the injector, be su hten lock nut. 4) Although the injector can be over hauled and repaired, r eplace it with a spare one, i f possible, wh en it has any troub Discha Loose any troub le. rge adjusting procedure for large-sized injector (SL-11) (Added to bucket pin) n lock nut (5) and turn adjustment screw (6) to adjust the discharge of grease made each time.
Discha rge adjusting procedure for large-sized injecto r (SL-11) (Added to bucket n lock nut (5) and turn a djustment screw (6) to adjust th e discharge of gre ase made ea