Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS BRAKE OIL PRESSURE CAUTION PILOT LAMP This lamp (5) warns the operator that the brake oil dropped. 3 - 13 pressure has When carrying out chec ks before starting: ped, the brake oil pressure circuit is not When the engine is stop actuated, so the caution pilot lamp and central CHECK lamp are also off. When operating: goes down, the caution pilot lamp and If the brake oil pressure lamp and central CAUTION lamp will flash, and the alarm buzzer will so und intermittently. If the monitor lamps flash, stop th gine immediately and check t he brake oil pressure circuit REMARK The monitor lamp may fl ash and go out after approx .

30 seconds immediately after the en gine is started. This is because pressure is being stored in the bra ke accumulator. It does not indicate any abnormality. ENGINE OIL PRESSURE CAUTION PILOT LAMP operator that the engine lubricating oil ine and check. ights up g: This lamp (6) warns the pressure has dropped. If it flashes, stop the eng Check before starting: L Engine started or runnin When the engine is start ed, the lubrication pressure i s formed and the lamps go out. If the engine lubrication pressur e d rops, the warning pilot lamp and c entral CAUTION lamp will f lash , and the buzzer will sound interm ittently.

BATTERY CHARGE CAU TION PILOT LAMP This lamp (7) warns the o perator that there is an abnormality i n the charging system when t he engine is running. ights up g: rted, the alternator generates electricity Check before starting: L Engine started or runnin When the engine is sta and the lamp goes out. If any abnormality occur s in the charging system, the caution pilot lamp and central CHEC charging circuit. K lamp will flash. If they flash, check the check