Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS TRANSMISSION CUT-OFF SWITCH WARNING TRANSMISSION CUT-OFF SET SWITCH CAUTION 3 - 26 When starting the machine o ff up a hill, turn the transmissio n cut-o ff switch to t he O FF position, depres s the brake pedal, then gradually depress the accele rator pedal and release the brak e slowl y to allo w the machine t o start off. Th is makes it possi ble to prevent the machine from ro lling back. Press push button switch (2) to turn it ON or OFF. nce, the pilot lamp lights up to show that the transmission is returned to Neutral depressed to the set position. again, the pilot lamp goes OFF and the h at the ON position.

depression position of the brake pedal, SMISSION CUT-OFF POSITION (PAGE ts as normal brake (like right brake pedal). s as normal brake, but also switches transmission to NEUTRAL. ON, the transmission cut-off pilot lamp will light up. If the switch is pressed o nce, the pilot lamp lights up to sho w that the system is ON, and the transmission is returne eutral when the brake pedal is depressed to the set positio If the switch is pressed system is turned OFF. Normally, keep the switc For details of setting the edal, see "ADJUSTING TRAN SMISSION CUT-OFF POSITION (P AGE 3-108)". OFF: Left brake pedal ac ts as normal brake (like righ t brake pedal) ON:

Left brake pedal act s as normal brake, but also switche s transmission If the switch is turned to ON, the transmission cut-off pilot la mp will ligh t up. REMARK With normal operation s, if the transmission cut-off function is used, the rise in the brake oil temperature and mperature is reduced. torque converter oil te The transmission cut- off set switch on the right console c an be used to s et the position of t he brake p edal t o be used for cutting off the transmission.

Apply the parking brake bef ore adjusting the transmission c ut-off p When this switch (3) is pressed to turn it ON, the t ransmission cut-off function can be us ed to set the position of the brake pedal for returning the transmis sion to Neutral. position can be set. Position (A): ON The cut-off When the switch is releas ed, it automatically returns t o its or iginal position. For details of setting the depression position of the b rake p edal, see "ADJUSTING TRAN SMISSION CUT-OFF POSITION (P AGE 3-108)".