6 SAFE OPERATION ENGLISH A Always use the appropriate tools and fixtures. Verify that they are in good condition before performing any service work. Make sure you understand how to use them before service. A Use ONLY correct engine barring techniques for manually rotating the engine. DO NOT attempt to rotate the engine by pulling or prying on the cooling fan and V-belt. This practice can cause serious personal injury or premature damage to the cooling fan and belt. A Replace fuel pipes and lubricant pipes with their hose clamps every 2 years or earlier whether they are damaged or not. They are made of rubber and age gradually.
A When servicing is performed together by two or more persons, take care to perform all work safely. A Keep a first aid kit and fire extinguisher handy at all times. WARNING AND CAUTION LABELS Part No.19077-8724-1 or 16667-8724-1 (55mm in diameter) (37mm in diameter) Part No.TA040-4957-1 Stay clear of engine fan and fan belt. CARE OF WARNING AND CAUTION LABELS 1. Keep warning and caution labels clean and free from obstructing material. 2. Clean warning and caution labels with soap and water, dry with a soft cloth. 3. Replace damaged or missing warning and caution labels with new labels from your local KUBOTA dealer. 4.
If a component with warning and caution label(s) affixed is replaced with a new part, make sure the new label(s) is (are) attached in the same location(s) as the replaced component. 5. Mount new warning and caution labels by applying to a clean dry surface and pressing any bubbles to the outside edge.