Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES Fuel Control Dial is used to light up the working lamp and monitor Swing Lock Switch WARNING 3 - 71 Dial (2 ) adjus ts the engine speed and (a)Low idling (MIN): Turned fully to the (b)Ful l speed Lamp Switch This s witch ( g. lightin (a) Night position: Lamps light up and monitor illumination is set to night mode (b) Day position: Lamps light up and m day mode (c) OFF position: Lamps go out. onitor illumination is set to tion is set to day mode.) (The monitor illumina tion is set to day mode.) Whe n not u sing the swing operation, e.g . when traveling, put the swing lock switch to the ON p osition.

On slopes, even when the swing lock s witch is at the ON position, the weight of the work equi pment may cause the u pper structure to swing if the swing control le ver is operated in the downhill direction. This s witch ( 4) is used to lock the uppe r structure so that it cannot swing. (a) ON position (actuated): The swing lock is always applied, and the upper s if the sw condition, up. (b) OFF position (canceled): The swin tructure will not swing even ing is operated. In this the swing lock lamp lights g lock is released, when the swing control lever, this operating allowing t he upper structure to swing.