Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES Room Lamp Switch NOTICE It is possible to turn on the interior cab room lamp even when starting switch is in the OFF position, do not forget to turn it off. Use this switch (12) to light up the room lamp. (a) ON position: Lamp lights up (b) OFF position: Lamp goes out The room lamp lights up even when the starting switch is at the OFF position 3 - 74 Emergency Pump Drive Swit ch nable you to carry out operation temporarily, when any problem occurs on the pump control in emergency. Furthermore, remove the cause of the problem immediately. NOTICE This switch is provided to e when system. Do not use it except in emergency.

Furthermore, remove th e cause of the problem immediate If this switch is depressed a nd moved to the EMERGENCY positio n by mistake, thereby engaging th e machine in the work, while the machine is in norm If "E02" is displayed during t al condition, an "E02" mark is shown i n th e display. he work, check that the switch is in the NORMAL position This switch (13) is used to m ake it possible to carry out operations temporarilyif any problem sh ould occur in the pump control system (when the display shows "E 02"). If the display shows "E02", m ove the switch up to make it possible to carry out work.

Swing Parking Brake Releas e Switch NOTICE This switch makes it possible t o perform swing operations for a short eve n when there is a problem in t he swing parking brake electric system. DO NOT use th is switch except in emergencies. Repai r th e problem as soon as possible . This switch (14) is used to m ake it possible to carry out operations temporarily if any problem sh ould occur in the swing parking brake system (when the upper structure d oes not swing but the display does not show "E03"). If the display does not sho w "E03", move the switch up to FREE ssible to carry out work.

position (a) to make it po When the switch is move d to FREE position (a), the swing l ock monitor flashes.