. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING and hoses. If any problem is 5. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 6. Check for problems in handrails, steps, loose bolts. If any problem is found, repair it. Tighten any loose bolts. 3 - 110 Walk-around Checks Before starting the engine, wal k around the machine and look at the u nderside o f chassis for anythin g unusua l like loose bolts and nuts, leakage hydraulic system. of fuel, oil and coolant.
Also check the condition of the work equipment and the ay, and collection of dust at places that reach high temperature. and Also check for loose wiring, pl ay, and collection of dust at places that reach hig h temper Remove any flammable materials f rom around the battery, engine, muffler, turb ocharger, o r other hig h temperatur e engine parts. Leakage of fuel or oil will cause the machine to catch fire. Check carefully, be su re to repair any probl em, or contac t your Komatsu distributor. Perform the following inspectio ns and cleaning every day before start ing engine for the d 1.
Check for damage, wear, play in work equipment, cylinders, linka ge, hoses Check for cracks, excessi found, repair it. 2. Remove dirt and debris fro m around the engine, battery, and radi ator. Check for dirt accumulated etc.) around the battery, e flammable materials are fo For the method of removin FINS, AFTERCOOLER FI around the engine and radiator. Also ch eck for flammable m aterial (dry leaves, t wigs, ngine muffler, turbocharger, or other high temperature engine parts. If any dirt or und, remove them. g dirt from the radiator, see "CLEAN AND INSPEC T RADIA TOR FINS, OIL COOLER NS AND CONDENSER FINS (PAGE 4 -62)". 3.
Check for coolant and oil l eakage around the engine Check for oil leakage from it. the engine and coolant leaks from the c ooling system. If an y problem is found, r epair 4. Check for oil leakage from hydraulic equipment, hydraulic tank, h oses, and y problem is found, repair the area wh ere oil is le 7. Check for problem in gaug es, monitor. Check for problem in the g Clean off any dirt from the auges and monitor in the operator's ca b. If any p roblem is found, repl ace the p arts. surface. 8. Clean, check rear view mir ror Check that there is no dam adjust the angle so that th age to the rear view mirror. If it is damag ed repair.
Clean the surface of t he mirro r and e area at the rear can be seen from the operator' s seat.