Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING of the Check Electric Wiring CAUTION 3 - 116 Do not open the radiato r cap unless necessary. When checking the c oolant, always wait for the e ngine to cool dow n and c heck the sub tank. Immediately after the e ngine is stopped, the coolant i s at a high tem perature and the radiator is under high intern al pressure. If the cap is removed t o check the coolant level in th is condition, th ere is a hazard of burns. Wait for the temperature to go down, then turn the ca p slowly to release the pressu re and remove i t carefully. 1.

Open the rear engi ne hood and check that th e cooling wa level is between the If the water level is sub-tank (1) to the FULL and LOW marks on the sub-tank ( low, add water through the water filler FULL level. t, tighten the cap securely. ecomes empty, there is probably wa 2. After adding coolan t, tighten the cap securely 3. If the sub-tank b ecomes empty, there is leakage. After chec no abnormality is f radiator. If it is low, density as the S Supercoolant to the king, repair any abnormalit y immediately ound, check the level of t he water in t add Supercoolant (AF-NA C) of the sa upercoolant in the radiator, then a sub-tank.

If fuses are frequently blown or if there are traces o f short-circuiting on the electrical wiring, promptly ask your Komatsu ur Komatsu distributor to locate th e cause and make the repair. Keep the top surface of the battery clean and check t he breather hol e in the battery cap. If it is c logged with dirt or dust, wash the battery cap to clear the breather hole. Check that there is n o damage to the fuses; t hat fuses of t he specified capacity a re used; that th ere i s no disconnection or trace of short-circuiting in the ele ctric wiring an d no damage to the cove ring. Check also that t here is no loosened termina ls. If any, tighten them. Moreover, pay particul alternator.

Be sure to check that t immediately.