. OPERATION MACHINE OPERATIONS AND CONTROLS Adjusting Angle of Rear View Camera WARNING 3 - 124 Be sure to adjust the c ameraes before starting work. If t hey are not adjusted p roperly, you cannot sec ure the visibility an d may be injured or may inju re someone ser iously. When adj usting the an gle of the came ra over the counterweight, provide a se cure scaffold using a s tep ladder and the n carry out the wo rk. Do not d o the wor k standing on t he counterweight, as there is al ways the danger of a se rious injury due to f alling- off from t he machine.
If t he image on the mo nitor is not al igned c orrectly, remove cover (1) and adj ust the mo unting angle ( A) of th e rear vie w camera Amount of adjustment of angle (A): Within a range of 35 °- 80 . When r emoving co ver (1), i nsert a flat-headed sc rewdriver into the hole the cov of cover ( 2), push the to oth on the insid e, and remove . Remov e 2 bolts (3 . Remov e cover (1)