. OPERATION MACHINE OPERATIONS AND CONTROLS AFTER STARTING ENGINE WARNING To stop the engine in emergencies or when the actuation of the engine 3 - 132 is abnormal or there is any other trouble, turn the key in the startin on. ions or operate the levers or pedal suddenl is at low temperature. Always carry out th n the startin switch to the OFF positi Do not carry out operat while the hydraulic oil warm-up operation for t temperature monitor dis he hydraulic equipment until the plays the correct temperature. hydraulic o (When the hydraulic oil t emperature is low, the low tempe rature displa shown on the right is giv (A) Display when temper ature is correct:
Monitor backgro und (C) is blu (B) Display when temper ature is low: Monitor backgroun d (C) is white If the warm-up operation for the hydraulic equipment is n ot carried ou thoroughly, and the mac hine is moved, the reaction of the control lever and pedals will be slow a nd the movement may not be wha t the operato intended. Always warm up the hydraulic equipment. In particular, i cold areas, always warm up the hydraulic equipment tho There are two types of w arm-up operation: warm up t he engine a nd warm up the hydraulic equipment.
In addition, depending on the envir onment, the method of carry ing out the warm-up oper ation may differ, so carry out the warm-up operation acco rding to the items given in th e appropria te section. (When only the engine is warmed up, the hydraulic e quipment is not warmed up , so always carry out the warm-up operation for the hydraul ic equipment separately from the warm-u p operation for the engine. Warm up the hydraulic equipment thoroughly e nsures that the hydraulic oil is warmed up and that warm hydraulic oil circulates in all the p and that war m hydraulic oil circulates control circuits.)