. OPERATION TRANSPORTATION the the so it follow the opposite procedure from stowing to set radio antenna (1) vertical, then secure it in position with bolt (2). 3 - 179 Securing Machine NOTICE eassemble the mirrors so that they are within the width of the machine. Stow the antenna and r eassemble the mirrors so that they are within the To prevent damage to th e bucket cylinder during transportatio n, fit a wooden block at one end of the bucket cylinder to prevent it from touching the floo r. Load the machine onto a trailer as follows: 1. Extend the bucket a slowly. 1. Extend the bucket a nd arm cylinders fully, then lower t he boom 2. Set the lock lever se curely to the LOCK positi on (L).
3. Stop the engine, the n remove the key from the starting switch. 4. Close all doors, win dows, and covers. ps, and doors fitted with locks. Lock the covers, ca ps, and doors fitted with lo 5. Place blocks under both ends of the tracks to pre machine from movi machine with chain Be particulary caref does not slip to the ng during transportation, and se s or wire rope of suitable st rength. Stowing Radio Antenna Loosen bolt (2) of rad io antenna (1) at the rear o f the ca b, lower the antenna, then tigh (1) in position. When unloading the ten bolt (2) again to secure radio antenna machine from the trailer and operating it,