Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE the element. NOTICE 4 - 21 8. If small hole s or thinner parts ar e found on the element when by shining a light thr ough it after cle aning , replace 9. Remove the cloth or tape coveri ng inne r eleme nt (6). Do not use an e lement whose folds o r gasket or seal a re damaged. If the element o r O-ring are cleaned a nd used again aft er they have bee n used for more than one y ear, it will cause problems. Do not use them 10. Check that t here is no dirt or oil stuck to the se al portion of the new ele ment or cleane d element. Wip e off any dirt or oil.

er element in straight with your hand when installing it to the air cleaner body. 11. Push the out er element in straig ht with your ha nd when installing it to th e air cleaner b If the outer e element can lement is held and r ocked l ightly u p and d own and to the lef t and right whi le pushing it in, the outer be inserted easily. NOTICE he air cleaner element facing in the correct direction. Be sure to install t he air cleaner element facing i n the cor rect direction Install so that the b ottom of the air cleane r eleme nt cylind er (face where no hole is drilled) (B), (C) is at cover (3) end .

If the direction of installatio n is mistaken, there is danger that it will c ause breakage of the air cleaner e. leaner element or serious damage to the engin