Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE at an it in 4 - 23 Replacing Eleme 1. Open the right door of the machine, remo ve 6 hooks (2) remove cover 2. Hold the outer element (5), rock it lightly up and down a the left and rig ht, and rotate the element t o the left and ri pull it out. Do not remove inner element (6) when d 3. When the oute r element (5) has been rem oved, check th inner element angle. If is is straight. has not come out of posit ion and is not 4. Wipe off or bru sh off the dirt stuck to cove r (3) and the ins the air cleaner 5. Remove any di rt or dust that is accumulat ed to evacuator (4) installed to NOTICE The inner element must not be cleaned and us ed again.

When r eplacing the outer e lement, replace the inner element at the same time. If the inner elemen t is not installed properly and t he outer element and cover areinstal led, there is danger that th e outer element will be damaged. The seal portion o n imitation parts lacks precisi on, and allows th e entry of dust, whi ch leads to damage of the engine. Do not use such imitation parts. 6. Remove inner element (6), then quickly i nstall the new i Insert the inne r element securely so that it does not mov 7.

Push the new outer element (5) in straigh t with your han d when installing it to the air cleaner bod If the element i s held and rocked lightly up and down and to the left and righ t while pushing it in, the element can be inserted ea