Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BUCKET SIDE CUTTER, SHROUD WARNING It is dangerous if the work equipment is mistakenly moved when Shroud 4 - 36 ng the bucket side cutters and work equipm ent in a stable co ndition, stop the engi ne, then set ver securely t o the LOCK positi As the locking pin is knocked out with force, there is danger that the pin out. Check th at there is no on e near the machine. pieces may afety glasses, fly during the re gloves, or other placement operation protective equipment Side Cutt ers mounting bolts (2), then remove side cutter (1). Replace Loosen mounting bo . Replace the side cutter, bolts, and nuts with n ew parts.

3630 Nm (310 to 370 kgm, o 2,676.2 lbft) Tightening torque for bolts: 3040 to 2,242.2 t 1. Plac e a bar on th e head of pin (1 ), hit the bar with a hammer to k out the pin , then remove t REMARK If it cann ot be remov ed by this metho d, for safety reaso ns, always contact y our Komats have the replacem ent carried out. 2. Clea n the mounti ng face. Fit a n ew shroud (2) in th e adapter, in pin (1) pa rtially by hand, then lock it with a hammer to ll the tooth t