. MAINTENANCE MAINTENANCE PROCEDURE EVERY 1000 HOURS MAINTENANCE Maintenance for every 50, 250 and 500 hours should be carried out at the same time. REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Prepare a container to catch drain fuel. Prepare a filter wrench 1. Turn the valve (1) at the bottom of the fuel tank to the CLOSE position (S). 2. Open the front engine hood. 3. Set the container to catch the fuel under the filter cartridge (2). 4. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 4 - 66 After the engine has been operated, all parts are at high temperature, so do not replace t he filter immediately.
Wait for all parts to cool down before starting the operation. nning. High pressure is generated inside the engine fuel piping system when the engine is ru When replacing the filter, wait for at least 30 seconds after stopping the engine to let the internal pressure go down before replacing the filter. Do not bring any fire or flame close. ure, so fuel may spurt out. Be careful when opening the air bleed plug in the fuel filter head. It is still under press NOTICE Genuine Komatsu fuel filter cartridges use a special filter that has highly efficient filte ring ability. When replacing the filter cartridge, always use a genuine Komatsu part.
The common rail fuel injection system used on this machine consists of more precise parts than the conventional injection pump and nozzle. If any part other than a genuine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Always avoid using substitute parts. When carrying out inspection or maintenance of the fuel system, pay more attention th an normal to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely.