. MAINTENANCE MAINTENANCE PROCEDURE 13. Tighten air bleed plug (C). Tightening torque: 4.9 to 6.9 Nm (0.5 to 0.7 kgm, 3.6 to 5.1 lbft) 14. Tighten wing nut (6) securely to lock lever (5) in position. Target tightening torque: 11.8 Nm (1.2 kgm, 8.7 lbft) tightening of the filter if any damage or 4 - 68 Blee d the air as follow 9. Add fuel to the fue l tank un til full (to FULL mark on the 10. 11. 12. Loosen a Loosen w Push in l Check th (C). 15. After repl acing the filter car tridge, st art the engine and run it at low idling for 10 minute Check fo r leakage of fuel f rom the filter s eal s urface. If any f uel is leaking, check th cartridge .
If there i s still fue l leakag e, repeat S teps 1 - 4 to remove the filter cartridg embedde d foreign material in the p acking surface is fo und, replace it with a new cartr - 15 to in stall it.