Komatsu — LOCATIONS

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Lock Pin (rear is locked) full position NOTICE Oil only flows when B mode is selected on the monitor. NOTICE Always install an additional filter in the return circuit on machines equipped with a hydraulic breaker. 6 - 6 This pin (4) locks the co Position (a): Locked Position (b): Only front of pedal can be operated t o full positio Position (c): Both front and rear of pedal can be o perated t When not using the a ttachment, set the lock pin to position (a).

When using a breake r, select B mode on the mo nitor and set the lock pin to position (b When using a Crash er, select P or E mode on t he monitor and set the lock pin to po When using the breaker , if the lock pin is set to positi on (c) and the pedal is operated in direction (D), it will cause damage or defective operation of t he breaker. To prevent this, w hen using the breaker, always set the lock pin to Before changing the po sition of the lock pin, stop the Breaker Circuit Addition al Oil Filter This filter (5) prevents d a breaker. eterioration of the hydraulic oil when using