. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENT OPERATIONS WARNING insert the lock pin in front of the pedal to 6 - 17 I f the pedal is op erated when the auto-deceler ation is being actuated a nd the engine speed ha s dropped, t he engine spe ed will suddenly rise, s o be careful when operating. I f you leave you r foot resting on the pedal and depress the pedal by mi stake, there is danger th at the attac hment may su ddenly move and caus e serious personal injury. If y ou do not need to operat e the pedal, d o not res t your foot o n the pedal.
When the attac hment is not being used, set the lock pin of the pedal to the LOCK position to prevent t he pedal from being operated. The method of o perating the attachment is When Using B reaker NOTICE When carrying out breaker operations, use the b reaker mode. If the brea ker mode is n ot used, the breaker may be dama With the workin g mode set to B mode, front-only FREE position (b). Press the ker. operate the brea 1. Set the work ing mode to B mode. When switch ing the working mode, see "Working Mode Sele ctor Switch 2. When it is re quired to change the settin g like a flow rate, see "Changing Breaker Mode Sett Precautions whe n using e stop valve is at the FREE position.
e working mode is B mode. the path of the oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". ering whether it is necessary to install an accumulator for the attachment circuit, contact the anufacturer and then decide. Check that th e stop valve is at the FRE Check that th e working mode is B mode For details of the path of the oil, see "H YDRAULIC CIRCUIT When consid ering whether it is neces attachment m anufacturer and then deci For other pre cautions when handling th e breaker, follow the i nstruction m anual fr om the bre aker manufacturer and use the b reaker correctly.
The deteriora tion of the hydraulic oil whe n using the breaker is much faster than for normal ope rations, so r educe the maintena nce interval for the hydraul ic oil and element. LIC BREAKER (PAGE 4-17)". For details, s ee "MAINTENANCE INTE RVAL FOR HYDRAU LIC BREAK