Komatsu — BLEEDING AIR FROM FUEL CIRCUIT

. ATTACHMENTS AND OPTIONS HANDLING THE ELECTRIC PRIMING PUMP HANDLING THE ELECTRIC PRIMING PUMP WARNING situation. valve (1) at the bottom of the fuel tank to the OPEN 6 - 19 BLEEDING AIR FROM FUEL CIRC UIT This machine i s equipped w ith an electric priming pump to b leed the air from the fuel circuit. In the following cases, use the proced ure below to bleed the air. replaced t of fuel When fuel fi lter has been When engin e has run ou When water is drained fr om the fuel pre When the a dditional wat er separator is When starti ng the engin me after replacing parts Whe n using the electric primin g pump, do not loosen the air blee d plug for the fuel circuit.

When the electric priming pump is operated, pressu re is applied to the fuel circuit , so if the air bleed plug is loosened, fuel will spurt out and create a dangerous 1. Turn the k ey in starting switch (1) to th e OFF position ( 2. position (O 3. Open the f ront engine h ood. 4. Turn the ai r bleed valve (2) to the ope