Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHANGING THE HEADLIGHT BULB 4.Remove: Cover 1 Bulb holder 2 Bulb NOTE: Turn the bulb holder counterclockwise and remove the defective bulb. WARNING Keep flammable products and your hands away from the bulb while it is on, since it will be hot. Do not touch the bulb until it cools down. 5.Install: Bulb Secure the new bulb with the headlight unit. New CAUTION: Avoid touching the glass part of the bulb. Keep it free from oil; otherwise, the trans- parency of the glass, life of the bulb, and luminous flux will be adversely affected. If oil gets on the bulb, thoroughly clean it with a cloth moistened with alcohol or lac- quer thinner. 6.Install: Bulb holder Cover Cover 7.Connect:

Headlight lead couplers 8.Install: Front fender panel Front carrier Refer to “SEAT, CARRIERS, FENDERS AND FUEL TANK”. 3 - 66 CHK ADJ CHK ADJ