HOSES AND LEADS 4 - 4 ENGINE REMOVAL ENG Order Job name/Part name Q’ty Remarks 1 2 3 4 5 6 7 8 9 Removing the hoses and leads Radiator inlet hose Water pump assembly Spark plug lead Crankcase breather hose Thermo switch lead Starter motor lead AC magneto lead coupler Speed sensor lead coupler Neutral switch lead coupler Reverse switch lead Engine ground lead 1 1 1 1 2 1 1 1 1 Remove the parts in the order below. Refer to “THERMOSTAT” in CHAPTER 5. Refer to “WATER PUMP” in CHAPTER 5. Green/White For installation, reverse the removal procedure.