CYLINDER HEAD COVER CHECKING THE TAPPET COVER 1.Check: Tappet cover (intake) 1 Tappet cover (exhaust) 2 Cracks/damage Replace. O-ring 3 New INSTALLING THE CYLINDER HEAD COVER 1.Apply: Sealant (Quick Gasket ) 1 (to the mating surfaces of the cylinder head and cylinder head cover) Sealant (Quick Gasket ) 1 : P/N. ACC-11001-05-01 Yamaha bond No. 1215: P/N. 90890-85505 2.Install: Cylinder head cover Washers 1 Bolts 2 3 4 5 6 NOTE: Tighten the cylinder head cover bolts in stages, using a crisscross pattern. 4 - 11 ENG R. T. 10 Nm (1.0 m • kg, 7.2 ft • lb) = 25 mm = 40 mm = 55 mm = 115 mm = 130 mm