CAMSHAFT AND CYLINDER HEAD REMOVING THE CAMSHAFT AND CYLINDER HEAD 1.Loosen: Camshaft sprocket bolts 1 2.Loosen: Timing chain tensioner cap bolt 3.Remove: Timing chain tensioner Timing chain guide (exhaust) Decompressor cam guide plates Camshaft sprocket Camshaft NOTE: Fasten a safety wire to the timing chain to prevent it from falling into the crankcase. When removing the camshaft sprocket, it is not necessary to separate the timing chain. 4.Remove: Cylinder head NOTE: Loosen the bolts in the proper sequence. Follow the numerical order shown in the illus- tration. Loosen each bolt 1/4 of a turn at a time until all of the bolts are loose. 4 - 18 ENG