Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CRANKSHAFT AND OIL PUMP CHECKING THE CRANKSHAFT 1.Measure: Crank width A Out of specification Replace the crank- shaft. Crank width: 74.95 ~ 75.00 mm (2.9508 ~ 2.9528 in) Side clearance D Out of specification Replace the crank- shaft. Big end side clearance: 0.35 ~ 0.65mm (0.0138 ~ 0.0256 in) : 1.0 mm (0.040 in) Runout C Out of specification Replace the crank- shaft. ***************************************************** Crankshaft reassembling point: The crankshaft 1 and the crank pin 2 oil pas- sages must be properly interconnected with a tolerance of less than 1 mm (0.04 in). ***************************************************** CAUTION:

The buffer boss and woodruff key should be replaced when removed from the crank- shaft. 4 - 76 ENG Runout limit: C1: 0.03 mm (0.0012 in)