3.Check: Shift fork movement (on the guide bar) Unsmooth operation Replace the shift fork and the guide bar. 4.Check: Spring Cracks/damage Replace. CHECKING THE SHIFT CAM 1.Check: Shift cam grooves Scratches/wear/damage Replace. CHECKING THE DRIVE AXLE 1.Measure: Axle runout Use a centering device and a dial gauge. Out of specification Replace the bent axle. CHECKING THE HIGH WHEEL GEAR AND MIDDLE DRIVE GEAR 1.Check: Gear teeth Blue discoloration/pitting/wear Replace. Mated dogs Rounded edges/cracks/missing portions Replace. 4 - 82 TRANSMISSION ENG Runout limit (drive axle): 0.03 mm (0.001 in)