Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE THERMOSTAT 1.Check: Thermostat 1 Does not open at 50 ~ 54 °C (122 ~ 158 °F) Replace. ***************************************************** Checking steps: Suspend the thermostat in a container filled with water. Slowly heat the water. Place a thermometer in the water. While stirring the water, observe the thermo- stat and thermometer’s indicated tempera- ture. ***************************************************** 1 Thermostat 2 Thermometer 3 Water 4 Container И Fully closed Й Fully open NOTE: If the accuracy of the thermostat is in doubt, replace it. A faulty thermostat could cause seri- ous overheating or overcooling. Opening 2.Check:

Thermostat housing cover Thermostat housing Cracks/damage Replace. Temperature INSTALLING THE THERMOSTAT 1.Install: Thermostat 1 Thermostat housing cover NOTE: Install the thermostat with its breather hole a facing up. Cooling system (with the specified amount of the recom- mended coolant) Refer to “CHANGING THE COOLANT” in CHAPTER 3. 3.Check: 2.Fill: Cooling system Leak Repair or replace any faulty part. 5 - 6 THERMOSTAT COOL