Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

DISASSEMBLING THE WATER PUMP 1.Remove: Rubber damper holder 1 Rubber damper 2 (from the impeller, with a thin, flathead screwdriver) NOTE: Do not scratch the impeller shaft. 2.Remove: Water pump seal 1 NOTE: Tap out the water pump seal from the inside of the water pump housing. 2 Water pump housing 3.Remove: Bearing 1 Oil seal 2 NOTE: Tap out the bearing and oil seal from the out- side of the water pump housing. 3 Water pump housing CHECKING THE WATER PUMP 1.Check: Water pump housing cover 1 Water pump housing 2 Impeller 3 Rubber damper 4 Rubber damper holder 5 Cracks/damage/wear Replace. 2.Check: Water pump seal Oil seal Water pump outlet pipe Cracks/damage/wear Replace.

Bearing Rough movement Replace. 5 - 9 WATER PUMP COOL