DISASSEMBLING THE CARBURETOR NOTE: Before disassembling the carburetor, make sure to note the number of times the pilot screw is turned out from the seated position to its set position. CHECKING THE CARBURETOR 1.Check: Carburetor body Float chamber Cracks/damage Replace. Fuel passage Contamination Clean as indicated. Fuel chamber body Contamination Clean. ***************************************************** Cleaning steps: Wash the carburetor in a petroleum based solvent. (Do not use any caustic carburetor cleaning solution.) Blow out all of the passages and jets with compressed air. ***************************************************** 2.Check: Float 1 Float tang 2 Damage Replace. 3.Check:
Valve seat 1 Needle valve 2 O-ring 3 Contamination/wear/damage Replace as a set. NOTE: Always replace the needle valve and valve seat as a set. 6 - 4 CARBURETOR CARB