TROUBLESHOOTING Troubleshooting chart When basic condition “a” and “b” exist, check the following points: Replace the wheel bearing. (Refer to “STEERING SYSTEM” and “REAR KNUCKLE AND STABILIZER” in CHAPTER 8.) NO Torque to specification. (Refer to “FRONT WHEELS AND BRAKE DISCS” and “REAR WHEELS AND BRAKE DISC” in CHAPTER 8.) YES Constant velocity joint bearings and differ- ential gear bearings are probably not dam- aged. Repeat the test or remove the individual components. YES Adjust per instructions. (Refer to “ADJUSTING THE REAR BRAKE” in CHAPTER 3.) YES Constant velocity joint bearings and final drive gear bearings are probably not dam- aged.
Repeat the test or remove the indi- vidual components. YES Remove the drive shaft components. 7 - 3 DRIV DRIV Elevate and spin both wheels. Feel for wheel bearing damage. YES Check the wheel nuts and hub nuts for tightness. NO Check the front constant velocity joint. Feel for bearing damage. NO Check the rear brake adjustment. NO Check the rear constant velocity joint. Feel for bearing damage. NO