Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

CHECKING THE FRONT BRAKE DISC 1.Check: Brake disc Galling/damage Replace. 2.Measure: Brake disc deflection Out of specification Check the wheel runout. If wheel runout is within the limits, replace the brake disc. Brake disc thickness a Out of specification Replace. INSTALLING THE FRONT WHEEL HUB 1.Install: Axle nut Cotter pin 1 New NOTE: Do not apply oil to the seat of the nut. Do not loosen the axle nut after torquing it. If the axle nut groove is not aligned with the cotter pin hole, align the groove with the hole by tightening the axle nut. INSTALLING THE FRONT WHEEL 1.Install: Wheel NOTE: The arrow mark 1 on the tire must point in the direction of rotation И of the wheel.

8 - 4 FRONT WHEELS AND BRAKE DISCS CHAS Brake disc maximum deflection: 0.15 mm (0.006 in) Brake disc minimum thickness: 3 mm (0.12 in) R. T. 200 Nm (20.0 m • kg, 145 ft • lb)