Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

EB702060 ASSEMBLING THE FRONT BRAKE MASTER CYLINDER WARNING All internal brake components should be cleaned and lubricated with new brake fluid only before installation. Whenever a master cylinder is disassem- bled, replace the piston seals and dust seals. EB702060 ASSEMBLING THE REAR BRAKE MASTER CYLINDER WARNING All internal brake components should be cleaned and lubricated with new brake fluid only before installation. Whenever a master cylinder is disassem- bled, replace the piston seals and dust seals. 1.Install: Brake master cylinder kit Nut 1 Joint 2 NOTE: Turn the adjusting bolt 3 until the clearance a is within the specified limits when install the joint 2 . Nut 1 2.Tighten:

8 - 22 FRONT AND REAR BRAKES CHAS Recommended brake fluid: DOT 4 Recommended brake fluid: DOT 4 Clearance a: 5 ~ 6 mm (0.20 ~ 0.24 in)