Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

FRONT AND REAR BRAKES Be careful that water does not enter the brake master cylinder when refilling. Water will significantly lower the boiling point of the brake fluid and may result in vapor lock. 4.Air bleed: Brake system Refer to “BLEEDING THE HYDRAULIC BRAKE SYSTEM” in CHAPTER 3. 5.Check: Brake fluid level Brake fluid level is under the “LOWER” level line Fill up. Refer to “CHECKING THE BRAKE FLUID LEVEL” in CHAPTER 3. INSTALLING THE REAR BRAKE MASTER CYLINDER 1.Install: Copper washers 1 New Brake hose 2 When installing the brake hose onto the brake master cylinder, make sure the brake pipe touches the projection a as shown.

Proper brake hose routing is essential to insure safe machine operation. Refer to “CABLE ROUTING”. 8 - 24 CHAS Union bolt 3 ● 30 Nm (3.0 m • kg, 22 ft • lb) R. T. CAUTION: WARNING WARNING