Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

ASSEMBLING THE FRONT BRAKE CALIPER WARNING All internal brake components should be cleaned and lubricated with new brake fluid only before installation. Replace the caliper piston seal whenever a brake caliper is disassembled. 1.Install: Caliper piston seal 1 Dust seal 2 New New 2.Install: Brake caliper piston 1 INSTALLING THE FRONT BRAKE CALIPER 1.Install: Brake caliper assembly Brake caliper mounting bolt 1 Brake hose 2 Copper washers 3 New Union bolt 4 CAUTION: When installing the brake hose on the brake caliper, make sure that the brake pipe touches the projection a on the brake caliper. 8 - 32 FRONT AND REAR BRAKES CHAS Recommended brake fluid: DOT 4 T. 30 Nm (3.0 m • kg, 22 ft • lb) R.

T. 27 Nm (2.7 m • kg, 19 ft • lb) R.