FRONT ARMS AND FRONT SHOCK ABSORBER INSTALLING THE FRONT ARMS AND FRONT SHOCK ABSORBER 1.Install: Front arms Front shock absorber ***************************************************** Installation steps: Install the front arm (upper) 1 and front arm (lower) 2 . NOTE: Lubricate the bolts 3 with lithium soap base grease. Be sure to position the bolts 3 so that the bolt head faces outward. Temporarily tighten the nuts 4 . Install the front shock absorber 5 . Install the ball joints. T R . Nut 7 : 25 Nm (2.5 m • kg, 18 ft • lb) Nut 8 : 48 Nm (4.8 m • kg, 35 ft • lb) . Install the new cotter pins. Tighten the nuts 4 . NOTE: Before tightening the nuts 4 , adjust the length a to 324 mm (12.8 in).
***************************************************** 8 - 49 CHAS R. T. Nut 6: 45 Nm (4.5 m • kg, 32 ft • lb) R. T. Nut 4: 45 Nm (4.5 m • kg, 32 ft • lb)