1 - 16 SPECIAL TOOLS GEN INFO Tool No. Tool name/How to use Illustration Adapter 90890-04059 YM-90069 Spacer 90890-04081 YM-91044 Adapter Spacer (crankshaft installer) These tools are used to install the crank- shaft. 90890-04062 YM-04062 Universal joint holder This tool is needed when removing or installing the universal joint yoke nut. 90890-04064 YM-04064-A Valve guide remover (ø 6) This tool is needed to remove and install the valve guide. 90890-04065 YM-04065-A Valve guide installer (ø 6) This tool is needed to install the valve guide. 90890-04066 YM-04066 Valve guide reamer (ø 6) This tool is needed to rebore the new valve guide.
90890-04086 YM-91042 Universal clutch holder This tool is needed to hold the clutch car- rier when removing or installing the car- rier nut. 90890-04128 YM-04128 Bearing retainer wrench This tool is needed when removing or installing the middle driven pinion gear bearing retainer. 90890-04134 YM-04134 Sheave spring compressor This tool is needed when removing or installing the secondary sheave spring. 90890-04135 YM-04135 Sheave fixed block This tool is needed when removing or installing the secondary sheave spring.