Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

SIGNAL SYSTEM EB806010 TROUBLESHOOTING IF THE BRAKE LIGHT AND/OR INDICATOR LIGHT FAILS TO COME ON: IF THE HORN FAILS TO SOUND: Procedure Check: 1.Fuse (main, ignition, signaling system) 2.Battery 3.Main switch 4.Wiring connections (the entire signal system) NOTE: Remove the following part(s) before trouble- shooting: 1)Seat 2)Fuel tank 3)Air cleaner case 4)Front carrier 5)Front fender panel Use the following special tool(s) for trouble- shooting. EB802011 EB802012 CORRECT * 9 - 34 ELEC – + Pocket tester: P/N. YU-03112, 90890-03112 1.Fuse (main, ignition, signaling system) NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the fuse. Replace the fuse.

2.Battery INCORRECT Check the battery condition. ● Refer to “CHECKING THE BATTERY” in CHAPTER 3. Clean the battery terminals. ● Recharge or replace the battery. ● Clean the battery terminals. ● Recharge or replace the battery. ● Open-circuit voltage: 12.8 V or more at 20 °C (68 °F)