Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

SIGNAL SYSTEM CHECKING THE SIGNAL SYSTEM 1.If the brake light fails to come on: 3.Voltage Connect the pocket tester (DC 20 V) to the bulb socket connector. Tester (+) lead Yellow terminal 1 Tester (–) lead Black terminal 2 bulb socket connector is faulty, repair it. This circuit is not faulty. 9 - 36 ELEC – + 1.Bulb and bulb socket NO CONTINUITY Check the bulb and bulb socket for continu- ● ity. CONTINUITY 2.Brake light switches NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the brake light switch. Turn the main switch to “ON”. ● Turn the lights switch to “LO” or “HI”. ● Check the voltage (12 V) of the “Yellow” ● lead on the bulb socket connector.

OUT OF SPECIFICATION MEETS SPECIFICATION