9.Horn does not sound. (for Europe and Oce- ania) 2.Voltage Connect the pocket tester (DC 20 V) to the horn connector at the horn terminal. Tester (+) lead Pink lead 1 Tester (–) lead Frame ground bulb socket connector is faulty, repair it. HORN IS NOT SOUNDED * 9 - 45 SIGNAL SYSTEM ELEC – + 1.Horn switch INCORRECT Refer to “CHECKING THE SWITCH”. CORRECT Replace horn switch. Replace horn switch. Turn the main switch to “ON”. ● Push the horn switch. ● Check for voltage (12 V) on the “Pink” lead ● at the horn terminal. OUT OF SPECIFICATION MEETS SPECIFICATION 3.Horn HORN IS SOUNDED Disconnect the black lead at the horn termi- ● nal.
Connect a jumper lead 1 to the horn termi- ● nal and ground the jumper lead. Turn the main switch to “ON”. ● Horn is good. Horn is good.