Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

EB803020 TROUBLESHOOTING IF THE FOUR-WHEEL DRIVE INDICATOR FAILS TO COME ON: Procedure Check: 1.Fuse (main, four-wheel drive) 2.Battery 3.Main switch 4.Four-wheel drive relay 1 5.Four-wheel drive relay 2 6.Four-wheel drive relay 3 7.On-command four-wheel drive switch and differential gear lock switch 8.Gear motor 9.Wiring connections (the entire 2WD/4WD selecting system) NOTE: Remove the following part(s) before trouble- shooting: 1)Seat 2)Front carrier 3)Front fender Use the following special tool(s) for trouble- shooting. EB802011 EB802012 * 9 - 53 2WD/4WD SELECTING SYSTEM ELEC – + Pocket tester: P/N.

YU-03112, 90890-03112 1.Fuse (main, four-wheel drive) NO CONTINUITY Refer to “CHECKING THE SWITCH”. CONTINUITY Replace the fuse. 2.Battery INCORRECT Check the battery condition. ● Refer to “CHECKING THE BATTERY” in CHAPTER 3. Clean the battery terminals. ● Recharge or replace the battery. ● Clean the battery terminals. ● Recharge or replace the battery. ● Open-circuit voltage: 12.8 V or more at 20 °C (68 °F) CORRECT 3.Main switch Refer to “CHECKING THE SWITCH”. CORRECT Replace the main switch. Replace the main switch.