Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

8.Adjust: Valve clearance ***************************************************** Adjustment steps: Loosen the locknut 1 . Insert a feeler gauge 2 between the adjuster end and the valve end. Turn the adjuster 3 clockwise or counter- clockwise with the tappet adjusting tool 4 until the proper clearance is obtained. Hold the adjuster to prevent it from moving and then tighten the locknut. Measure the valve clearance. If the clearance is incorrect, repeat the above steps until the proper clearance is obtained. ***************************************************** 9.Install: All removed parts NOTE: Install all removed parts in the reverse order of their disassembly. Note the following points.

10.Install: Recoil starter Spark plug Tappet covers (exhaust) Tappet cover (intake) 3 - 15 ADJUSTING THE VALVE CLEARANCE CHK ADJ CHK ADJ Tappet adjusting tool: P/N. YM-08035, 90890-01311 R. T. Locknut: 14 Nm (1.4 m • kg, 10 ft • lb) LT R. R. T. T. R. T. 14 Nm (1.4 m • kg, 10.1 ft • lb) R. T. 18 Nm (1.8 m • kg, 13 ft • lb) R. T. 12 Nm (1.2 m • kg, 8.7 ft • lb) R. T. 10 Nm (1.0 m • kg, 7.2 ft • lb)