Special tools Note. If necessary, the workshop should be equipped with 2 deep (minimum 80 mm) hexagonal sockets, 22 mm and 27mm, for removing the injectors. These sockets can be obtained from a well stocked tool supplier and are not stocked by Volvo Penta. 885224-6 Engine fixture. The tool should be supplemented with 4 pcs pin screws 479971-4, 4 pcs nuts 971095-5, 4 pcs screws 970964-3 ( M10x140), 4 pcs screws 955311-6 (M8x140), 4 pcs washers 960148-5 (M10), 4 pcs washers 960141-0 (M8) and the arms from engine fixture 885050-5. 9992520-8 Overhaul stand 856927-9 Measuring plastic (disposable item) 9510060-8 Multimeter 9999179-6 Key for dismantling of fuel and oil filters.
885251-9 Adapter for measuring compression pressure MD2030 . 10 OF) 885252-7 Adapter for measuring compression pressure MD2010 , MD2020 and MD2040 . 1 8