Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING 3 - 77 Checks Before St Always check the it ems in this se ction before st arting the engine Do no t open the rad iator cap unless necessary. Wh en checking th e coolant, always wait for the engine to cool down and check the su b tank. Immediately after t he engine is sto pped, the coolan t is at a high t emperature and the radiator is under high internal pre ssure. If the cap is remov ed to check the coolant level in this condition , ther e is a hazard of burns. Wait for the temperature to go down, then turn the cap slowly to r elease the press ure and remo ve it c 1.

Ope n cover (1) of the sub tan k inspection w indow at the front of th e radiator s ide (right side of machine) of the engine hood, and check that t he coolant lev el is between th e FULL and LOW line s on the two sub tanks (2 ). If the coolan t level is low , add wat er through th e water filler t o sub tanks (2) to the FULL level. 2. Afte r adding co olant, tighten t he cap secure ly. 3. If the sub-tank leakage. After c becomes e hecking, repai mpty, there is r any abnorma probably water lity immediately. It no abnormality is found, che ck the level o f the water i n the radiator. If it is l density as the ow, add Supercoolant (AF- NAC) of the same Supercoola nt in the radiator, then add .

Supercoolant to the sub-tank