Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING Checking clogging monitor (1) of the monitor panel flashes, the element or if air monitor panel flashes cleaned, replace the outer of dust indicator (4), it is 4 - 17 W hen usi ng compressed air, there is dan ger of dirt flying and causing per lways w ear protective glasses, dust ma sk, or other protective equipmen W hen rem oving the outer element from th e air cleaner body, it is dangerous to pull it out by force.

W hen working in high places r where t he foothold is poor, be careful not to fall because of the reactio n when pulling out the ou If ai r clean clea n the ai Replacing Replacin I c i e f one y leaner clogging monitor (1) on th tely after the element is cl mmedia lement, inner element, and O-ring. REMARK Dus t indica tor (4) gives a guideline for t air c red leaner zone o element. If the yellow piston n the outside circumference time to clea n the element. NOTICE an the air cleaner element until the air cleaner clogging monitor on the monitor panel light up. If the element is D o not cle il the air cleaner clogging monit light up.

If the element is c f In leaned fr equently before the air cleaner clogging monitor light up, the air cleaner will not be able to display its performance ully, and the cleaning efficiency will also go down. , more dirt stuck to the element will fall inside the inner element. addition , during the cleaning operation , more dirt stuck to the element will fall inside the inner e If inspecti on, cleaning, or maintenance is carried out with the engine runn ing, dirt will enter the en gine and cause damage to t he engine . Always stop the engine befor e carrying out these operations.