Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE ADJUST BUCKET CLEARANCE WARNING (7): Bucket (8): Arm (9): Bush 4 - 31 It is dangerous if the work equipment is mistakenly moved wh en adjusting the bucket cleara nce. Set t he work equi pment in a stable cond ition, stop the e ngine, then se t lock leve r (1) securely to the LOCK position If there is exces sive free play on th e coupling section o f the bu cket and arm, adjus t the bucket clearan ce in the following manner . 1. 2. 3. 4. 1. Set the wor k equipment to the position show n in t he diagram on the right , then stop the engi ne and set th e lock lever ( 1) to the LOCK p osition (L). plate (2) and plate (6). n size to free play (a).

m or 1.0 mm (0.02 or 0.04 in). 2. 3. Loosen 3 b Take out sh olts (3), 6 bolts (4), ims (5) equivalent i plate (2) and n size to free plate ( play ( Thickness of shim (5) is 0.5 m m or 1.0 mm ( 0.02 o When free play (a) is less tha n a thickness compress t he shims by tighten 4. Tighten 3 b olts (3) and 6 bolts Wit h this adjust ment, clearance (b) becomes larger, b ut play (a) is