. OPERATION DETAILED CONTROLS AND GAUGES 3 - 19 Fuel Gauge el of the fuel in the fuel tank. r should be in the black range. This meter (8) displays the lev Duri ng operations, the indicato r should be in the black range If the indicator enters red range (A) during operations, there is less than 300 liters (79.26 US gal) k and add fuel. (B): Red range (C): Black range of fuel remaining in the tank, so chec (A) - (A) - REMARK If the indicator enters red rang e (B), there is less than 210 liters g. d range (B), fuel level monitor (D) e (B), there is less than 210 liters g.
If the (55.4 8 US gal) of fuel remainin Whe light If the (55.4 8 US gal) of fuel remainin Whe n the indicator is in the red range (A) to (B), fuel level mo nitor (D) li ghts up red. If the indicator enters the red ra nge (A) to (B), do not carry ou t operations on steep slop es. Ther e is danger o f the engi ne stalling. The correct fuel level may not b e displayed for a short time w hen the starting switch is t urned ON , but this i s n ot an abnormality. Hydraulic Oil Temperature Gau ge c oil temperature. Mete r (9) displays the hydrauli Duri ng operations, the indicator should be in the black range ( A) to (C).
If the indicator enters red range (A) during operations, the hydraulic oil te mperature as gone above 102°C (215.6°F). idle and wait for the hydraulic oil Stop REMARK When the indicator is in the re d range (A) to (B), the hydraulic oil han 102°C (215.6°F) han 105°C (221°F) Whe temperature is as follows. Red range position (A) : More t range position (B) : More t Red Whe n the indicator is in the red range (A) to (B), fuel level mo nitor (D) li ghts up red. indicator is at position ( C) when the engine is started, the If the hydraulic oil temperature is 20° C (68°F) or lower, and hydrau lic oil temperature monitor (D) lights up white. In this case, carry ou t the warming-up operation.
For d Warm Up (PAGE 3-104)". etails, see "Hydraulic Equipment War