BODY (UPPERSTRUCTURE) / Hood REMOVAL AND INSTALLATION OF HOOD Removal 1. Open the left and right side covers. 2. Loosen hose bands (3) (2 used) securing intake hose (4). Disconnect intake hose (4) from pipe (2) and the engine. 3. Disconnect the harness for sensor (1) at the connector part. 1 CAUTION: The hood (5) assembly weight: ZW220: 117 kg (260 lb) ZW250: 120 kg (265 lb) 4. Attach a nylon sling onto hood (5). Hoist and hold hood (5). Remove bolts (7) (4 used) and washers (6) (4 used) from hood (5). Hoist and remove hood (5) from the frame. 2 Air Cleaner : 17 mm Installation 3 CAUTION: The hood (5) assembly weight: ZW220: 117 kg (260 lb) ZW250: 120 kg (265 lb) 1.
Attach a nylon sling onto hood (5). Hoist hood (5). Align the exhaust pipe and the vent of the muffler and install hood (5) to the frame with bolts (7) (4 used) and washers (6) (4 used). 4 W4GB-02-03-007 5 : 17 mm : 50 N m (5 kgf m, 36 lbf·ft) 2. Connect the harness for sensor (1) at the connector part. 3. Connect intake hose (4) to the engine and pipe (2). Secure intake hose (4) with hose bands (3) (2 used). 4. Shut the left and right side covers. 6 7 W4GB-02-03-006 W2-4-1