Axles Chassis Rear axle In addition to the familiar hypoid axles with 390, 440 and 485 mm ring gear diameters and disk brakes, the planetary hub reduction rear axles with drum and disk brakes are also available for the Arocs. Overloadable vehicles and all-wheel drive vehicles can also be fitted with a 16-tonne version of the planetary hub reduction rear axle as special equipment.
W35.10-1059-00 Planetary hub reduction rear axles with drum brakes 1 1st rear axle with through-drive 2 2nd rear axle Rear axle, ring gear 390, hypoid, 9.5 t, single (A2O) The wide 9.5 t rear axle for single 385/55 R 22.5 HA (I2N) or 385/65 R 22.5 HA (I2Q) tires has been developed especially for payload-optimized four-axle vehicles. It is available only in combination with the Loader option (V1Y) and is standard equip- ment on the 964.330/338 concrete mixers. Due to its greater track width, it is not possible to convert this axle to twin tires.
W35.10-1060-00 A Rear axles for single and twin tires B Wide rear axles for single tires 54 i Introduction of the New Truck Generation - The New Arocs (Model 964) – This printout will not be recorded by the update service. Status: 01 / 2013 –