CHECKS BEFORE START 8 B Display Selector Switch Press the display selector switch while the engine is running. The LCD meter display will change from one indication mode to the other. Change the two-mode display according to your jobs. B LCD for Normal Operation C Fuel gauge To avoid personal injury or death: A Before adding fuel, be sure to stop the engine. A Be sure to keep open flame away from the machine. Otherwise a fire may result. With the starter key at the " RUN " position, the fuel remaining in the fuel tank is indicated in the block. (1) Display selector switch C AUX port in use (1) Fuel gauge (A) "E" If the fuel runs short, open the cap and refuel the tank.
(1) Display selector switch A Even with the starter key not yet inserted, press the electronic meter's user setting switch or the display selector switch, and the LCD shows the hour meter, fuel gauge, water temperature gauge and clock for 10 seconds. (1) Fuel cap A If the fuel gauge indicator is near the "E" or the "Feed fuel" message appears, add fuel as soon as possible. If the indicator is near "E" and the machine is operated on a slope, the engine may run out of fuel. A To open the fuel cap, keep the key inserted.