13 CHECKS BEFORE START User settings 3. Press the switch 2 twice to move the cursor into position. Then press the save switch 5 to make the following screen appear. By pressing the switch 4, the year, month, day, hour and minute will be selected in this order. Select an item to readjust. A If you have any question, consult your local KUBOTA Dealer. B Setting the Clock 1. Turn the starter key to the "RUN" position. (1) Switch 5 (2) Switch 2 (3) Switch 3 (4) Switch 4 Press the switch (Switch 2) and the numeric setting will be smaller. Press the switch (Switch 3) and the numeric setting will be larger.
(1) Starter switch (A) STOP (B) RUN (C) START Hold down the or switch, and the numeric setting will change quickly. Press the switch (Switch 4), and the year, month, day, hour and minute will be selected in this order. 2. Press the switch 1 to make the log record/periodic check/clock set screen appear. 4. Save the new setting with the switch (Switch 5). Press this switch 5 again to set the clock. (1) Switch 1 (2) Switch 5 (3) Cursor (4) Switch 2 and 3 (5) Switch 4 (1) Switch 5